MD SPORTS 12702, Assembly Instructions Manual

Page: 4 / 9

3
12702 PARTS LIST
#1 #2 #3 #4
#5 #6 #7 #8
MOTOR
1 Piece
EVA PAD
4 Pieces
MAIN FRAME
1 Piece
PUSHER
2 Pieces
ROUND PUCK
2 Pieces
GOAL
2 Pieces
10mm ROUND
HEAD SCREW
4 Pieces
Assembly Instructions
1. Open the carton of your new Table Top Hockey near where you will play. Remove all the contents from inside the
carton and verify that you have all listed parts as shown on the Parts Identifier.
2. Place the Main Frame (#1) on a clean, flat surface. And then t ear off the backside paper of the EVA Pad (#8) and
stick them at the bottom of the Side Apron as shown in FIG.1A.
3. Attach the Goals (#4) to each end of the table using the Screws (#6) as shown in FIG. 1.
4. Tear off the backside paper of the Felt Pad (#5) and stick them at the bottom of the Pusher (#2) as shown in FIG.2.
5. Remove the battery cover (underneath the table) and insert 6 AA Batteries (not included) into battery box. Turn it on
to start the game.
Pre-installed
FELT PAD
2 Pieces

!



FIG.2
#5
#2
FIG.1A
#8
Underside
the table
FIG.1
#4
#6
#6