manualshive.com logo in svg

MCZ JAZZ Hydromatic 30 Acs H1, Installation Manual

Share
Download
MCZ JAZZ Hydromatic 30 Acs H1 Installation Manual Download Page 41

39

11-ELECTRICAL CONNECTION

Technical Dept. - All rights reserved - Reproduction prohibited

ELECTRICAL CONNECTION

First connect the power cable to the back of the stove and then to a wall socket.

The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.

It is recommended to disconnect the power cable when the stove is not used.

STOVE POWER SUPPLY

After connecting the power cable to the back of the stove, turn the switch at the back to position (

I

).

The luminous switch button will light up.

The switch on the back of the stove is used to power the system.

On the rear of the boiler there is a fuse holding compartment located underneath the supply socket. Use a screwdriver to open the fuse-

holder compartment and if necessary replace them (3.15 A delayed)

STOVE SWITCH

FUSE HOLDER COMPARTMENT

STOVE POWER SUPPLY

ELECTRICAL STOVE CONNECTION

Summary of Contents for JAZZ Hydromatic 30 Acs H1













































Reviews:

No comments

Brands by name

Popular brands

Load more brands