45
22-RECOMMENDATIONS FOR SAFE USE
Technical Dept. - All rights reserved - Reproduction prohibited
A
C
B
G
REPLACING THE OVERPRESSURE DISCHARGE FOR THE COMBUSTION CHAMBER
Overpressure rubber bushing “G” of the combustion chamber (fig. A) may get worn and/or damaged, it is therefore necessary to replace it
once a year to ensure correct system operation.
To replace it, follow the instructions below
• Remove the top
• Remove the first ceramic panel of the side cladding or the steel panel (depending on the type of stove)
• Unscrew the screw-washer-rubber bushing-roller shown in figure A/C (on both sides of the cover)
Proceed now with installing the new kit:
• Prepare the screw-washer-rubber bushing-roller aligned as shown in fig. C and screw them into the structure.
• Tighten the screw all the way.
Now ensure that the compression of the rubber bushing is correct using the template supplied with the kit:
• Place the template on the cover (fig. B); the head of the screw must be touching the element above it. If necessary, tighten or loosen
the screw so that it is touching the upper element.
Summary of Contents for EGO-STAR Hydromatic 12
Page 51: ......
