H
D
G
F
Q
C
F
41
23-CLEANING AND MAINTENANCE
Technical Dept. - All rights reserved - Reproduction prohibited
EXAMPLE OF A CLEAN BRAZIER
EXAMPLE OF A DIRTY BRAZIER
Only by properly servicing and cleaning the product is it possible to ensure its safety and correct operation.
ATTENTION!
All the cleaning operations of all parts must be performed with the product completely cold and the plug
disconnected.
Disconnect the product from the 230V power supply before performing any maintenance operations.
The product requires little maintenance if used with certified good quality pellets.
DAILY OR WEEKLY CLEANING PERFORMED BY THE USER
Ash pan cleaning
Press door “
H
” at the bottom right and open it. Turn the handle of door “
G
” to the right and open it by moving it downwards.
Remove and empty ash pan “
D
”. Wipe away any residual ash before reinserting the pan. Your experience and the quality of the pellets will
determine the ash pan cleaning frequency. However, it is recommended not to exceed 7 days. After removing and emptying the ash pan
“
D
” also clean the lower part of the compartment (see arrow “
Q
”).
When cleaning the ash pan, we recommend removing piece “
C
” near the brazier and use the nozzle of the vacuum cleaner to remove any
ash deposits.
Attention! When cleaning is completed, remember to place back the ash pan “D”, close again all doors (“G”, “H”, “F”), insert
the brazier upper part “C”.
Summary of Contents for EGO-STAR Hydromatic 12
Page 51: ......
