2
1-WARNINGS AND WARRANTY CONDITIONS
SAFETY PRECAUTIONS
•
Installation, electrical connection, function test and maintenance must only be carried out by authorised and
qualified personnel.
•
Install the product in accordance with all local and national legislation and regulations in force in the region or state.
•
Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator. It is strictly forbidden to use
liquid fuel.
•
Do not put any fuel other than wood pellets in the hopper.
•
The instructions provided in this manual must always be complied with to ensure the product and any electronic appliances
connected to it are used correctly and accidents are prevented.
•
The user, or whoever is operating the product, must read and fully understand the contents of this installation guide before
performing any operation. Errors or incorrect settings can cause hazardous conditions and/or poor operation.
•
Do not climb on or lean on the product.
•
Do not put linen on the product to dry. Any drying racks or the like must be kept at a safe distance from the product.
Fire hazard.
•
All liability for improper use of the product is entirely borne by the user and relieves the Manufacturer from any civil and criminal liability.
•
Any type of tampering or unauthorised replacement with non-original spare parts could be hazardous for the operator’s safety and
relieves the company from any civil and criminal liability.
•
Many of the surfaces of the product get very hot (door, handle, glass, smoke outlet pipes, etc.).
Avoid coming into contact with
these parts, without adequate protective clothing or suitable implements, such as gloves with thermal protection
or
“cold handle” operating systems.
•
It is forbidden to operate the product with the door open or the glass broken.
•
The product must be powered by an electrical system that is equipped with an effective earthing device.
•
Switch the product off in the event of a fault or malfunction.
•
Accumulated unburned pellets in the burner after each “failed start-up” must be removed before lighting again. Check that the
burner is clean and positioned properly before lighting again.
•
Do not wash the product with water. Water could get inside the unit and damage the electrical insulation and cause electric shocks.
•
Do not stand for a long time in front of the product in operation. Do not overheat the room you are in and where the product is
installed. This could cause injuries and health problems.
•
Install the product in a location that does not feature a fire hazard and is equipped with power and air supplies and smoke extractors.
•
In the event of fire in the chimney, turn off the device, disconnect it from the mains electricity and do not open the hatch. Then
contact the competent authorities.
•
The product and the cladding must be stored in a dry place and must not be exposed to weathering.
•
It is recommended not to remove the feet that support the product in order to guarantee adequate insulation, especially if the
flooring is made of flammable materials.
•
In the event of a malfunction of the ignition system, do not force it to light by using flammable materials.
•
Special maintenance must only be performed by authorised and qualified personnel.
•
Assess the static conditions of the surface on which the weight of the product will rest and provide suitable insulation if it is made of
flammable material (e.g. wood, fitted carpet or plastic).
•
Live electrical parts: only power the product after completing assembly.
•
Disconnect the product from the 230V power supply before performing any maintenance operation.
