10
1-WARNINGS AND WARRANTY CONDITIONS
Our solid bio-combustible products, (hereinafter called “Products”) are designed and manufactured in compliance with one of the
following European standard harmonised to Regulation (UE) no. 305/2011 for construction products:
EN 14785
: “Residential space heating appliances fired by wood pellets”
EN 13240
: “Room heaters fired by solid fuel.”
EN 13229
: “Inset appliances including open fires fired by solid fuels”
EN 12815
: “Residential cookers fired by solid fuel”
The products also comply with the essential requirements of Directive
2009/125/EC (Eco Design)
and, where applicable, Directives:
2014/35/EU
(LVD - Low Voltage directive)
2014/30/EU
(EMC - Electromagnetic Compatibility directive)
2014/53/EU
(RED – Radio Equipment directive)
2011/65/EU
(ROhS)
Having specified the above, we highlight and report that:
• This manual and technical data sheet, also available on our website,
bear all of the specific indications and necessary and
essential information to choose the product, to install it correctly and to properly size the smoke expulsion system;
•
the Products must be
installed, controlled and serviced
by a qualified operator, according to the instructions in this manual and
in compliance with the laws and installation and maintenance standards in force in individual countries, so as to provide an efficient
heating system, properly sized according to the needs of the home;
• if the Products are thermally stressed
, constantly operating for several hours at high power (e.g. 3, 4 hours a day at outputs P4
or P5), we recommend more frequent cleaning and reducing the interval between routine maintenance operations according to the
operating condition of the product. We furthermore point out that these operating conditions increase the risk of premature wear of
the product, especially those parts exposed to the direct heat of the fire (e.g. combustion chamber), the original condition of which
can undergo modifications and deterioration which, among other things, could generate noise during operation of the unit due to
mechanical expansion.
The manufacturer will not be held liable if the above information is ignored.
