McQuay M5WM 007G, Manual

Page: 89 / 118

87
Remote Controller Operation Guide
G11 Remote Controller
Temperature Setting
•
To set the desired room
temperature, press the button to
increase or decrease the set
temperature.
•
The temperature setting range is
from 16
°
C to 30
°
C
•
Press both buttons simultaneously
to toggle the temperature setting
between
°
C and
°
F
Turbo Mode
•
Press the TURBO button to
achieve the required set
temperature in a short time.
ON Timer Setting
•
Press the SET button will activate
the on timer function.
•
Set the desired on time by pressing
the SET button continuously.
•
Press the CLR button to cancel the
off timer setting
Sleep Mode
•
Press the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO mode.
•
When it is activated in COOL
mode, the set temperature will be
increased 0.5
°
C after 30mins, 1
°
C
after 1 hour and 2
°
C after 2 hours.
•
When it is activated in HEAT mode,
the set temperature will be
decreased 1
°
C after 30mins, 2
°
C
after 1 hour and 3
°
C after 2 hours.
Personalised Setting
•
Press and hold the button for 3s to
initiate personalized setting.
•
Set the individual setting e.g.
MODE, SET TEMP or FAN SPEED
and leave for 4s to save
•
2 groups of settings are allowed to
stored in the handset
Fan Speed Selection
•
Press the button until the desired
fan speed is achieved.
Operating Mode
•
Press the MODE button to select
the type of operating mode.
•
For Cooling only unit, the available
modes are: COOL, DRY & FAN.
•
For Heatpump unit, the available
modes are: AUTO, COOL, DRY,
FAN & HEAT.
OFF Timer Setting
•
Press the SET button will activate
the off timer function.
•
Set the desired off time by pressing
the SET button continuously.
•
Press the CLR button to cancel the
off timer setting
Automatic Air Awing
•
Press the SWING button to
activate the automatic air swing
function.
•
To distribute the air to a specific
direction, press the SWING button
and wait until the louver move to
the desired direction and press the
button once again.
On/Off Button
•
Press Once to start the air
conditioner
•
Press again to stop the unit
Clock Time Setting
•
Press or - to increase or
decrease the clock time.
Ionizer
•
Press the button to activate the
negative Ion function, which will
refresh the indoor air effectively.