MCO Home MH8-FC-EU User Manual Download Page 6

Page: 6 / 6

www.mcohome.com

User Manual

MCOHome Technology Co., Ltd 2015

1-year Limited Warranty

MCOHome warrants this product to be free from defects in material and workmanship under

normal and proper use for one year from purchase date of the original purchaser. MCOHome will, at

its option, either repair or replace any part of its products that prove defective by reason of improper

workmanship or materials. THIS LIMITED WARRANTY DOES NOT COVER ANY DAMAGE TO

THIS PRODUCT THAT RESULTS FROM IMPROPER INSTALLATION, ACCIDENT, ABUSE,

MISUSE, NATURAL DISASTER, INSUFFICIENT OR EXCESSIVE ELECTRICAL SUPPLY,

ABNORMAL

MECHANICAL

ENVIRONMENTAL

CONDITIONS,

ANY

UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFICATION. This limited warranty shall not

apply if: (i) the product was not used in accordance with any accompanying instructions, or (ii) the

product was not used for its intended function. This limited warranty also does not apply to any

product on which the original identification information has been altered, obliterated or removed, that

has not been handled or packaged correctly, that has been sold as second-hand or that has been resold

contrary to Country and other applicable export regulations.

Summary of Contents for MH8-FC-EU






