McLaughlin MCL 36C, Repair Manual

Page: 87 / 90

REPAIR INSTRUCTIONS
McL 36/42C
5.6.4
27. Install the retaining ring. ( EYE PROTECTION MUST BE
WORN FOR SAFETY).
28. Seat the bearing against the retaining ring by support-
ing
pressure plate and pressing on the hub.
29. The reassembly order of the disk kit is as follows:
1st - Friction Disk
2nd - Belleville Spring (O.D. facing pressure plate)*
3rd - Spacer Plate
This order is repeated until all disks, springs and spacer
plates are in place.
*Note: Belleville springs must be intalled I.D. to I.D. for
proper clutch operation.
30. Install front plate and reinsert snap ring. (EYE PROTEC
TION MUST BE WORN FOR SAFETY). (NOTE: DISKS
MUST BE COMPRESSED IN ORDER TO HAVE ACCESS
TO THE SNAP RING GROOVE).
31. Rotate disks by hand to insure proper seating. The
disks should be evenly spaced.
32. Rotate the hub in the cylinder to insure that the bear
ings are free.
29