background image

4

Safety First

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide

FCC Information (For US Customers)

1. IMPORTANT NOTICE: DO NOT MODIFY

    

THIS 

PRODUCT

This product, when installed as indicated in the instruc-

tions contained in this manual, meets FCC requirements. 

Modification not expressly approved by McIntosh may 

void your authority, granted by the FCC, to use the 

product.

2. CAUTION:

• To comply with FCC RF exposure compliance require-

ment, separation distance of at least 20cm must be 

maintained between this product and all persons.

• This product and its antenna must not be co-located 

or operating in conjunction with any other antenna or 

transmitter.

3. COMPLIANCE INFORMATION:

• Product Name: A/V Processor

• Model Number: MX123

• 

This product contains FCC ID:RAX-AIOS4-0S:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, NY 13903

Tel. (607) 723-3512

IC Information (For Canadian Customers)

1. PRODUCT:

This product contains IC: 4711A-AIOS40S

This product complies with RSS-210 of Industry Canada. 

Operation is subject to the following two conditions: (1) 

this product may not cause harmful interference, and (2) 

this product must accept any interference received, in-

cluding interference that may cause undesired operation. 

This Class B digital apparatus complies with Canadian 

ICES-003.

2. CAUTION:

To reduce potential radio interference to other users, the 

antenna type and its gain should be so chosen that the 

equivalent isotropically radiated power (e.i.r.p.) is not 

more than that permitted for successful communication.

Informations sur IC (pour les clients Canadiens)

1. APPAREIL:

Cet appareil contiens IC: 4711A-AIOS40S

Cet appareil est conforme à la norme CNR-210 du Can-

ada. L’utilisation de ce dispositif est autorisée seulement 

aux deux conditions suivantes : (1) il ne doit pas produire 

de brouillage, et (2) l’utilisateur du dispositif doit être 

prêt à accepter tout brouillage radioélectrique reçu, 

même si ce brouillage est susceptible de compromettre 

le fonctionnement du dispositif. Cet appareil numérique 

de la classe B est conforme à la norme NMB-003 du 

Canada.

2. ATTENTION:

Afin de réduire le risque d’interférence aux autres

utilisateurs, il faut choisir le type d’antenne et son gain 

de façon à ce que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne soit pas supérieure au niveau req-

uis 

pour l’obtention d’une communication satisfaisante.

Canadian Customers: CAN ICES-3 (B)/NMB-3 (B)

RF Exposure Information

This equipment complies with FCC/IC radiation expo-

sure limits set forth for an uncontrolled environment 

and meets the FCC radio frequency (RF) Exposure 

Guidelines in Supplement C to OET65 and RSS-102 of 

the IC radio frequency (RF) Exposure rules. This equip-

ment has very low levels of RF energy that are deemed 

to comply without testing of specific absorption ratio 

(SAR).

Cet équipement est conforme aux normes d’exposition 

aux radiations FCC/IC définies pour un environnement 

non contrôlé et satisfait les directives d’exposition à la 

radiofréquence (RF) dans le supplément C des OET65 

et RSS-102 des règles d’exposition à la fréquence radio 

(RF) IC. Cet équipement a de très faibles niveaux 

d’énergie RF qui sont jugés conformes sans test de taux 

d’absorption spécifique (SAR). 

R&TTE(EN) Information

1. DECLARATION OF CONFORMITY

Our products follow the provisions of EC/EU directives:

LV: 2006/95/EC

EMC: 2004/108/EC

RoHS: 2015/863/EU

ErP: EC regulation 1275/2008 and its frame work

        directive 2009/125/EC

R&TTE Directive 1999/5/EC.

2. IMPORTANT NOTICE: DO NOT MODIFY  

 

                                 THIS PRODUCT

This product, when installed as indicated in the instruc-

tions contained in this manual, meets R&TTE directive 

requirements. Modification of the product could result in 

hazardous Radio and EMC radiation.

3. CAUTION:

Separation distance of at least 20cm must be maintained 

between this product and all persons.

This product and its antenna must not be co-

located or operating in conjunction with any other 

antenna or transmitter.

Summary of Contents for MX123





































Reviews: