1. Select the required track within which the
desired Index code is encoded, using the
numeric buttons.
button until the desired Index number appears in the
to increase the INDEX number, and
decrease the INDEX number.
DIRECT INDEX SEARCH
After selecting a required track number using the
in the stop mode, select the required index number
starts from the selected index point.
TIME COUNTER DISPLAY
The time counter shows various time readouts,
as follows. First, when the disc tray is closed with
the disc loaded, the total disc playback time ©
will be displayed for several seconds.
20
button. Playback
button with the MCD7009
or
using the
or
HOW
TO
OPERATE
During the manual search operation, sound will be audible but the output level will be
lowered. This lets you search for any required portion while checking the sound.
When the desired position is reached, release the button to reenter the previous mode.
During the normal play mode (or in the programmed playback mode), when the MCD7009
reaches the end of the disc (or program) after the
button has been pressed, the MCD7009
enters the pause mode whereas when the MCD7009 reaches the beginning of the disc (or
program) after the
In the single repeat mode, holding the
within the current track.
button has been pressed, the MCD7009 enters the playback mode.
button will move the playing position
or
or
button will move to the next or
In the program playback mode, holding the
previous programmed track, respectively.
INDEX SEARCH
Index Search is possible using the index
to any desired points on the discs where
and
buttons. This allows direct access
INDEX codes have been encoded.
The MCD7009 skips to the selected INDEX point and playback starts from the point at which
the designated Index code is encoded.
If the Index number designated exceeds the highest Index number in the selected track,
playback will begin from the portion with the highest Index number in the track.
While the MCD7009 searches the desisgnated Index point, the time counter displays no
time information. During this interval, no control buttons except for the stop and the open/close
buttons can be engaged.
DIRECT TRACK SEARCH
stop mode. Pressing the play
selected track and play it.
or pause
Select a required track number using the
or
button allows the MCD7009 to search the
button with the MCD7009 in the
or
2. Press the index
INDEX display.
to
Press
press
