HOW
TO
OPERATE
TO UNLOAD THE DISC
Press the open/close button on the front panel; playback stops and the disc tray will slide out,
and all functions are reset to their initial settings.
TO TEMPORARILY SUSPEND PLAYBACK (PAUSE MODE)
Press the pause button. Playback stops at the current position and the Red LED above the
PAUSE pushbutton turns on. To resume playback from the same position, press the play button
or pause button again.
SINGLE PLAYBACK
1. Press the single button. The SINGLE indicator will light in the display.
2. Press the numeric buttons corresponding to the required track.
3. A single track will be played back, after which the MCD7009 will enter the stop mode. To
release the single mode, press the single button again.
PROGRAM PLAYBACK
The program playback function allows you to program up to 20 tracks for playback in any
desired order.
PROGRAMMING REQUIRED TRACKS
Example:
4. Press the play button.
Programmed playback starts from the first programmed track, the 2nd track on the disc.
When this track is finished, the MCD7009 skips to the 15th track which has been stored as
the second track in the program, etc.
The programmed contents will be held in memory even after programmed playback has
been completed or when programmed playback is stopped by pressing the stop (•) button.
When the stop button is pressed in the stop mode, the contents of the program are relased.
To release the program mode, press the program button again.
During program playback, the TOTAL REMAIN time display shows the total remaining time
of the programmed tracks, from the current position.
14
to cancel it.
3. Press the numeric buttons in the following order:
If the
button is pressed by mistake, press the clear button on the remote control unit
1. Press the stop button.
2. Press the program button.
The PROGRAM indicator lights in the display.
To program tracks in the order
in the stop mode.
