McHale
Pro Glide R3100
Rear Disc Mower
48
When the mower is being removed from the tractor it is very important to release the
pressure from the suspension accumulator. First lower the leg stands and secure them
in the storage position. Ensure the mower bed is unlatched and lowered to the ground
for stability. Connect the hydraulic hose (with tap) to the single (or double) acting
hydraulic supply. Then open the tap and release the oil back into the tractor until the
suspension pressure on the gauge is reading zero.
After all hydraulic pressure is released, disconnect all hydraulic lines from the tractor.
Then disconnect the 7 pin lighting plug. Finally disconnect the PTO shaft followed by
the top-link and lift arms and drive away from the mower.
