HEBT-3V BUN TOASTER
13
P/N 1011377 Rev. G 07/17
McDonald’s
MAINTENANCE (continued)
Figure 13. Accessing Top Cooling Fan
Clean Cooling Fans and Electrical
Housings (Annually)
1. Turn the toaster’s power switch to the off position.
The toaster enters a cool-down mode and will au-
tomatically shut down when complete. Unplug the
power cord.
2. Remove the bun feeder and set aside.
3. Remove the top two screws from the control hous-
ing cover and slowly lower the cover.
4. Remove any debris or dust from the cooling fan
with a small brush. Wipe away any debris with a
clean, dry towel Inspect the electrical compartment
for crumbs and debris. Clean out all crumbs and
debris using a clean, dry towel or nylon bristled
brush. Be careful not to disrupt any of the electrical
wiring.
5. Slowly close the control housing cover. Reconnect
with the screws.
6. Remove the screws from the bottom plate on the
rear of the unit and slowly lower the cover.
7. Remove any debris or dust from the cooling fan
with a small brush. Wipe away any debris with a
clean, dry towel. Inspect the electrical compartment
for crumbs and debris. Clean out the crumbs and
debris using a clean, dry towel or nylon bristled
brush. Be careful not to disrupt any of the electrical
wiring.
8. Close the bottom plate and re-install the screws.
9. Reattach the bun feeder. Plug in the power cord,
turn the power on, and test the unit before returning
it to service.
Figure 14. Accessing Rear Cooling Fan
Summary of Contents for 9210859
