2
CLI Commands
McDATA OPENconnectors Command Line Interface USER MANUAL
2-48
FRQILJ]RQLQJUHQDPH=RQH6HW
6\QWD[
renameZoneSet “zoneSetName”
3XUSRVH
This command changes the name of the zone set in the work area.
'HVFULSWLRQ
Changes are not activated on the switch until the
config.zoning.activateZoneSet command is issued.
3DUDPHWHUV
This command has one parameter.
&RPPDQG([DPSOH
Root> config zoning renameZoneSet TheUltimateZoneSet
FRQILJ]RQLQJDGG:ZQ0HP
6\QWD[
addWwnMem “zoneName” wwn
3XUSRVH
This command adds a WWN zone member to the specified zone in
the work area.
'HVFULSWLRQ
The CLI supports the number of zones members per zone specified
for a given product.
3DUDPHWHUV
This command has two parameters.
&RPPDQG([DPSOH
Root> config zoning addWwnMem TheUltimateZone
10:00:00:00:C9:22:9B:64
zoneSetName
Specifies the new name for the zone set. The
zoneSetName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdef
ghijklmnopqrstuvwxyz0123456789$-^_
Spaces are not permitted, and the first character
must be alphabetical.
zoneName
Specifies the name of the zone.
wwn
The WWN of the member to be added to the
zone. The value of the WWN must be in
colon-delimited hexadecimal notation (for
example, AA:00:AA:00:AA:00:AA:00).
Summary of Contents for OPENconnectors
Page 8: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Tables viii...
Page 14: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Preface xiv...
Page 164: ...McDATA OPENconnectors Command Line Interface USER MANUAL P N 620 000134 500 Glossary g 14...