ROBOCUT ROBO-CHIPPER
2
1.2 –
REQUIRED OPERATOR TRAINING
Reading this manual thoroughly:
•
All machine operators and maintenance personnel must read this entire manual thoroughly and
carefully and follow the instructions provided.
•
It is the duty of the employer to ensure that operators possess the skills required to operate the
machine and that they have read this manual fully.
1.3 –
INSTRUCTIONS FOR USE AND STORAGE
The operating instructions in this manual relate to the operation of the
‘McConnel Robo-Chipper
’
.
This instruction manual must be read and used as follows:
•
The instructions manual must be considered an integral part of the machine and must be read
carefully
•
The instructions manual must be easily accessible to operators and maintenance technicians.
•
Keep the manual for the entire lifetime of the machine.
•
Ensure that any updates are incorporated within the manual.
•
Give the manual to any other user or subsequent owner of the machine.
•
Use the manual in such a way as not to damage it or its contents.
•
Do not remove, tear out or rewrite any part of the manual for any reason.
•
Keep the manual away from moisture and heat.
•
In the event that the manual is lost or partially damaged or it is otherwise unreadable in part or all
of its content, a new copy should be requested from the manufacturer.
Pay maximum attention to the following symbols and their meanings; they are used to highlight
important information such as:
Refers to supplements or suggestions for correct use of the machine.
Refers to dangerous situations which can occur when using the machine,
that could cause serious injuries and/or property damage.
Refers to dangerous situations that may arise when using the machine,
which if not avoided, could cause serious injuries or death.
CAUTION
WARNING
DANGER
Summary of Contents for ROBO-CHIPPER ROBOCUT
