McConnel ROBO-CHIPPER ROBOCUT, Operations & Parts Manual

Page: 42 / 72

36
ROBOCUT ROBO-CHIPPER
7. FAULT, CAUSE, SOLUTION
Most operational faults occur because the machine is used incorrectly; it
is therefore essential to fully read and follow the instructions in the manual
carefully.
If the machine malfunctions, refer to the following troubleshooting table for possible causes and
possible solutions for overcoming them.
Maintenance and repair to the machine must be carried out by qualified
technicians, after having checked that there are no potentially hazardous
situations or conditions.
Contact McConnel if faults should occur or if faults are discovered,
indicating the machine identification number and its hours of operation. If
the fault or the reason for it is not indicated in the list shown in the tables
below - contact McConnel in order for repairs to be carried out.
CAUTION
WARNING
CAUTION