McConnel ROBO-CHIPPER ROBOCUT, Operations & Parts Manual

Page: 18 / 72

ROBOCUT ROBO-CHIPPER
5
1.4.4 – Liability
McConnel shall not be held liable for any incident involving personal injury or property damage
which may occur due to:
• the failure to comply with the instructions provided in this manual regarding the operation, use
and maintenance of the machine.
• abrupt movements or incorrect manoeuvres when operating or performing maintenance on the
machine.
• modifications made to the machine without the prior written authorisation from McConnel.
• events that fall outside the normal and correct use of the machine.
Using the machine as mentioned above can cause tipping hazards or
structural failure that could result in injuries or even death.
In any event, should the user ascribe any incident or accident to a machine defect, they must be
able to demonstrate that the consequent damage was a principal and direct consequence of such
a defect.
Any tampering with the machine or the use of non-original spare parts can be grounds for voiding
the warranty and put the operator's safety at risk.
Always use original spare parts for repairs and maintenance. McConnel
shall not be held responsible for any damage which should occur due to
failure to follow the above requirements.
The machine is guaranteed according to the contractual agreements
specified at the time of sale.
The warranty shall nevertheless lapse whenever the regulations and/or
instructions laid out in this manual are not followed.
DANGER
WARNING