Catena 4612/4611 User Manual
Engineering Report 234001173 Rev
A
- 14 -
Figure 12 Cloning libraries using the script
7.2
Arduino IDE Setup
Now follow the below steps to upload the test sketch using Arduino IDE:
1.
Open the Arduino IDE. Go to File>Preferences>Settings. Add
“https://github.com/mcci
-catena/arduino-
boards/raw/master/BoardManagerFiles/package_mcci_index.json”
to the list in Additional Boards Manager URLs.
2.
If you already have entries in that list, use a comma (,) to separate the entry you're adding from
the entries that are already there.
3.
Next, open the board manager. Tools>Board:...Search for MCCI’s BSPs
4.
Install the latest BSP for MCCI Catena STM32 to add support for Catena 4612 in Arduino IDE.
5.
MCCI Catena STM32 Boards
should be installed from the Boards Manager.
6.
Once the board has been installed,
Catena 4612
board has to be selected under
MCCI Catena
STM32 Boards
.
