83
ePolicy Orchestrator
®
3.6 Walkthrough Guide
Installing and setting up
8
12
On the
HTTP Configuration
dialog box, change the
Agent-to-Server communication port
to
82
and the
Console-to-Server communication port
to
83
.
Some HTTP ports (ports 80 and 81 in particular), are commonly used by many HTTP
applications and services. Because of this, port 80 may already be in use and not
available. McAfee recommends changing the port number to avoid any conflicts.
13
Click
Next
to save the port information.
If you do see a warning message saying that one or more HTTP ports are in use,
click
OK
and repeat
Step 12
, this time specifying unused HTTP ports.
14
On the
Set E-mail Address
dialog box, type the e-mail address to which the default
notification rules send messages once they are enabled.
This e-mail address is used by the ePolicy Orchestrator Notifications feature. This
feature is covered in this guide, so enter an e-mail address that receives messages
you can view.
15
On the
Ready to Install
dialog box, click
Install
to begin the installation.
The installation takes approximately 20 minutes to complete and may prompt you
to reboot the system during the installation.
16
Click
OK
when prompted to reboot and be sure to log back in when the system
reboots to allow the installation to continue.
17
When the installation is finished, click
Finish
.
Once the installation is complete, you can open the ePolicy Orchestrator console to
begin deploying agents and anti-virus products to the client systems in your network.
Figure 8-1 HTTP Configuration dialog box
Summary of Contents for ePolicy Orchestrator
Page 2: ......
