Installation and use
25
SEEDER MAT MCK 2500 SX
5.5 Programming the number of “paths”
For greater clarity, consult the
examples in paragraph 5.5.1 on
page 27 and 28.
It is necessary to
program the number of swaths the
seeder performs, which correspond
to the swaths of the sprayer that will
be used; for example: if a 4 meter
seeder is used, and a 20 meter
sprayer is chosen, program “5” ( 5 X
4 = 20 ); if a 3 meter seeder is used,
2
M.
P
R
O
G
M.
ON
OFF
MCK 2500 SX
1
and an 18 meter sprayer is chosen, program “6” ( 6 X 3 = 18). Turn on the
computer (
ON
OFF
key), and press the
M.
key more than once, until the third
left arrow on the display appears.
Programmable field
: see table - paragraph 5.5.2
step
: 1
default
: 3
Press
and
to change the value displayed.
Once the desired value is reached, release the keys, and wait <3> seconds to allow
for the new data to be memorized.
When the data has been memorized, the bars in the upper portion of the display will
turn on to visualize the programmed number of parts.
