Installation and use
19
SEEDER MAT MCK 2500 SX
4.1 Keyboard
FUNCTION KEY
M.
Programming key:
Allows to program (through the
and
keys) the parameter
when selected (indicates the specific signal arrow, see chapter 3,
“Programming” – pg. 22).
Seeder operating width;
Impulses from speed inductive sensor every 100 linear meters
covered;
Number of “paths” to seed for covering the width of the sprayer
that will be used;
M.
Display key:
allows to display, at that moment, the size indicated by the specific
signal arrow:
advancing speed in Km/h
linear distance covered in meters
Turbine RPMs
Display key:
allows, at the moment, to visualize and set to zero the quantity
indicated by the signal arrow:
total worked area
partial worked area
START / STOP key :
allows to activate and de-activate the alarms and the “path” counter,
in order to properly activate the closing of rows.
ON
OFF
ON/OFF key:
used to turn the computer on and off
During the programming phase, this key allows to increase the value
of the parameter selected, one digit at a time (by keeping the key
pressed, the values displayed will change more rapidly).
During the working phase, allows to move from one “path” to the next
without the need to raise or lower the row tracer disk arm on which
the special magnetic sensor is installed.
