MBW F800GT, Rider'S Manual

Page: 126 / 189

ATTENTION
Missing plastic washer for
painted components.
Paint damage
Install plastic washers under-
neath the screw heads.
Install four screws
1 on left and
right.
Trim panels
2 Nm
Install the seat ( 66).
Jump-starting
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle.
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V.
Damage to the on-board elec-
tronics.
Make sure that the battery of
the donor vehicle has a voltage
rating of 12 V.
Removing seat (
65).
Removing centre trim panel
(
123).
When jump-starting the engine,
do not disconnect the battery
from the on-board electrical
system.
8
124
z Maintenance