MBW F800GT, Rider'S Manual

Page: 67 / 189

authorised BMW Motorrad
dealer.
ATTENTION
Use of ordinary commercially
available adhesive tape.
Damage to the plastic lens of the
light.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer, in order
to avoid damaging the plastic
lens of the light.
Headlight beam throw and
spring preload
Headlight beam throw is gener-
ally kept constant when spring
preload is adjusted to suit load.
However, a spring preload ad-
justment might not suffice if
the motorcycle is very heavily
loaded. Under these circum-
stances, headlight beam throw
has to be adjusted to suit the
weight carried by the motorcycle.
NOTICE
If there are doubts about the cor-
rect headlight beam throw, have
the setting checked by a special-
ist workshop, preferably an au-
thorised BMW Motorrad dealer.
Adjusting headlight beam
throw
1 Headlight beam-throw ad-
justment
The headlight beam-throw is ad-
justed via an engage pivot lever.
A Position for heavy load
B Neutral position
Seat
Removing seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
4
65
z Operation