MBW F800GT, Rider'S Manual

Page: 168 / 189

Standard BMW service
A standard BMW service con-
sists of the following mainten-
ance work:
Perform vehicle test with the
BMW Motorrad diagnosis sys-
tem.
Check the coolant level.
Check/adjust the clutch play.
Check the freedom of move-
ment of the throttle cable and
check for kinks and chafing.
Check the front and rear brake
pads and brake discs for wear.
Check the front and rear brake-
fluid levels.
Visually inspect the brake
pipes, brake hoses and
connections.
Check the tyre pressures and
tread depth.
Check the toothed belt.
Check the belt tension.
Check the steering-head bear-
ing.
Check the ease of movement
of the side stand.
Check the ease of movement
of the centre stand (if vehicle
fitted with the "centre stand"
optional extra).
Check the specified torque of
threaded fasteners with torque
wrench: main frame.
Check the specified torque of
threaded fasteners with torque
wrench: left and right front
footrest plates.
Check the specified torque
with torque wrench: eccent-
ric clamp.
Check the lights and signalling
equipment.
Check that the engine start
suppression system is in work-
ing order.
Perform final inspection and
check of roadworthiness.
Set the service-due date and
service countdown distance.
Check the battery charge state. Confirm BMW service in the
on-board documentation.
12
166
z Service