MBW F800GT, Rider'S Manual

Page: 129 / 189

multifunction display remain off
when the ignition is switched
on)
it has to be disconnec-
ted from the on-board cir-
cuits
and re-charged with the
charger connected directly to
the battery posts.
Charge via the charging socket,
with the battery connected
to the motorcycle's on-board
electrical system.
NOTICE
The motorcycle's on-board elec-
tronics know when the battery
is fully charged. The on-board
socket is switched off when this
happens.
If a second battery is installed,
with the motorcycle battery
connected to the on-board
electrical system as described
above, charge it via the
front
charging socket.
With the second battery con-
nected to the motorcycle's on-
board electrical system, charge
it via the socket at the rear left.
NOTICE
The second battery is wired dir-
ectly to the rear socket and is
not connected to the on-board
electrics. Consequently, the re-
strictions regarding the type of
charger to be used do not apply
for the second battery.
Engine rpm, starting
from which the second
battery is charged
min 2000 min -1
Comply with the operating in-
structions of the charger.
NOTICE
If you are unable to charge the
battery through the on-board
socket, you may be using a char-
ger that is not compatible with
your motorcycle's electronics. If
this happens, disconnect the bat-
tery from the on-board systems
and connect the charger directly
to the battery.
Charging battery when
disconnected
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
After charging, remove the pole
terminal of the charger from
the battery posts.
NOTICE
The battery has to be recharged
at regular intervals in the course
of a lengthy period of disuse.
See the instructions for caring
for your battery. Always fully re-
charge the battery before restor-
ing it to use.
8
127
z Maintenance