MBW ERGO-TAMP, Operator'S Safety And Service Manual

Page: 8 / 17

- 5 -
WARNING
Do not place any part of body above pole tamper
assembly. Device will “Jump” when air is
activated.
3. Depress trigger to begin tamping.
4. Release trigger to stop device.
• Initiating the Ergo-Tamp might result in a slight delay in
operation, this is normal.
CAUTION
PINCH HAZARD: Avoid placing hands below main
body of the MBW Vibration Suppressor
• The MBW Ergo-Tamp is a spring loaded device.
Efficiency of isolation will depend on many factors
including air pressure, pole tamper type and operator
input. When operating, try to find the correct down
pressure that results in the least amount of transmitted
vibration.
Storage
• The MBW Ergo-Tamp is made of high quality corrosive
resistant components. To lengthen the life of the entire
tamper assembly, drop a small amount of light oil into
trigger assembly and run device for a minute before long
term storage.