MBS HELLIA, Instructions For Installation And Use Manual

Page: 31 / 38

Pellet Stove - HELLIA - 8kW
9.12. Pellet Type
TYPE PELLET option (the pellet type)
enables you to decrease or increase
the pellet load!
Depending on the pellet quality, you
can correct the pellet dose in all
modes! If the user determines that the
burner fire-pot becomes overloaded
during combustion, but the boiler was
cleaned according to the instruction,
then the user can correct it by
decreasing the pellet during dosing!
To change it, press the SET key and
use key 5 to enter menu 10 as shown
in Image 58.
ENGLISH SERBIAN
Image 58
Then press the SET key and enter
menu 10 as shown in Image 59.
The upper section shows the value
00, meaning the correction wasn’t set!
Use key 1 or 2 to set the correction by
selecting a correction between 00 and
-09.
Image 59
If you set it to 01, this means that the
pellet loading was increased by 2%,
when set to 02 the pellet loading is
increased by 4%, if the number is 03
the loading is increased by 6% and so
on up to 09 and the max value of 18%!
The same procedure is for decreasing
the pellet, but the values go from -01
to -09 (Image 60)!
Image 60
The correction percentages refer to
the factory set operation modes!
Exit the correction setting by pressing
the key 4 twice and returning to the
start screen.
9.13. Stove Cleaning Warning
Message:
Once the time period was defined by
the program, the display will show the
message for the monthly product
cleaning – clean the stove (Image 61)!
Image 61
NEnu
10 TIP
PELET NEnu
10 TYPE
PELLET
UBACIVA
N PELETA
1
0 NEn
u 1
0
0
0 0
0
NEnu
LOAD
INITIAL
UBACIVA
N PELETA
1
0 NEn
u 1
0
-
02 - 02
NEnu
LOAD
INITIAL
OCISTIT
I PEC PULIRE
BRACIER
E