MBS HELLIA, Instructions For Installation And Use Manual

Page: 18 / 38

Pellet Stove - HELLIA - 8kW
9.1. Stove Commissioning
Once the stove is connected to
power, set the power switch located
at the back of the stove to position 1.
The display will show the following
messages: time, room temperature,
heating intensity value (from P1 to
P5) i OFF – the stove is not in
function (Image 12).
Image 12
Hold key 4 (ON) for several seconds.
When the display message changes
from OFF to START, the stove will
start operating (Image 13) and the
heater is activated followed by
message LIGHTER WAIT (Image
14).
Image 13
Image 14
After that, the messages LIGHTER
WAIT (lighter starting) LOAD PELLET
and FIRE WAIT (Images 15 and 16)
appear alternately indicating that the
stove has been loaded with pellet
which was inserted into the burner and
the fire is expected to be lit in the
firebox.
Image 15
Image 16
ENGLISH SERBIAN
07:33
16.5°C
P-4 OFF
UBACIVA
N PELETA
P-
4 16.5°
C
07:3
6 07:36
16.5°C P-
4 LOAD
PELLET
07:35
16.5°C
P-4 START
16.5°C P-4 16.5°C P-
4
LIGHTER
ZAGREVAN
WAIT UPALJACA
07:3
6 07:3
6
07:42
16.5°
C
FIRE
WAIT 07:4
2
P-
4 16.5°
C P-
4
CEKANJ
E
PLAMEN
A