6
1.2 Safety officer
•
Operator is any natural or legal person, who uses the Split & Merge Station or on
whose instructions the Split & Merge Station is used.
•
The operator or his safety officer must guarantee that
-
all relevant regulations, references and laws are adhered to.
-
only qualified employees work on and with the Split & Merge Station.
-
the operator is notified on the various risks and dangers, which emanate from
the Split & Merge Station for man and machine.
Qualified employees are persons who are authorised by the safety officer, based on
their training, experience, instruction and knowledge on relevant standards and
provisions, accident prevention regulations and operating conditions, to carry out the
required operations and be able to identify and prevent potential dangers. (Definition
for skilled personnel according to IEC 364).
1.3 Electrical connection
•
The installation and repair works must only be carried out by a specialist.
•
The applicable national accident prevention regulations shall be observed for
work on live parts.
•
The electrical installation shall be carried out in accordance with the pertinent
regulations (e.g. line cross section, safeguarding, ground wire connection etc.)
Furthermore, notes are available in the Split & Merge documentation.
•
In connection with another module e.g.
MBO
sheeter or unwind
is connected via
four multipoint connectors.
( Cekon 16A for power supply (compressor) and one 5pol. Control plug for the 24
VDC supply for the antistatic unit).
The splitter motor is connected via two separate plugs to the unwind or cross
cutter.
•
The electric motors used are arranged on the right rotating field in the split &
merge station.
•
It is imperative to observe the safety instructions described in chapter 1!
Attention Danger:
¾
Personal safety:
Check whether all terminals are voltage-free before working on
the machine.
¾
Disregarding of the safety instructions:
there is the threat of death of serious
injury.
¾
Caution: property damage:
Incorrect handling of the machine can cause
damage to the machine and its surrounding area.