5
¾
Use of incorrect replacement parts. If you use non-approved replacement parts
the function is not guaranteed. Only use replacement parts approved by the
manufacturer!
•
The operator has to instruct the operating personnel on the possible risk of
explosion when handling inflammable liquids, in accordance with explosion
guidelines.
¾
Only use cleaning agent and solvent with a flashpoint of at least 55°C.
¾
Aggressive chemicals can damage components.
¾
Do not heat over flashpoint.
¾
Provide good room ventilation.
¾
No naked flame, no ignition sources.
¾
Immediately eliminate any matter emitted correctly.
Warning:
Use protective equipment and follow safety data sheets!
•
Safety notes on transportation:
¾
Caution –
damage to components!
¾
Damage caused by improper transportation
¾
On acceptance of the machine pay attention to packaging damage and report this
immediately to the manufacturer.
•
Safety note on maintenance:
¾
Only carry out authorised maintenance work.
¾
Maintenance work should only be carried out by a trained employee who is
familiar with and has been briefed on the dangers as well as having the necessary
skills.
¾
Prior to start-up, all safety conditions must be satisfied.
¾
Caution
– live voltage. Inobservance can result in an electric shock.
Warning
danger to life!
Please observe the following points for maintenance and repair works on the
electrical system:
9
Switch machine to voltage-free.
9
Safeguard against resetting.
9
Determine voltage freedom.
9
Ground and short-circuit.
9
Cover adjacent live parts.
¾
Caution
– Risk of damage from electric and electronic components!