oper3500.doc
Page 6
23/01/2004
4.1 Loading Staples :
1.
Only those staples sold or recommended by your supplier should be used in the Sprint 3000
Bookletmaker. Use of non recommended staples may damage the stapling heads and they are not
covered by any warranty.
2.
Raise the top cover and depress the small blue lever at the front of each stapling head and pull out
the cassette. Staple type 66/6 will be suitable for most thin books. Type 66/8 should be used for
thicker sets of paper, over 16 sheets of 20 lb bond.
3.
Push the filled staple cassettes back after reloading until they click into position.
WARNING - Never operate the machine when the staple cassettes are extended for
loading. This will cause serious irreparable damage to the stapling heads and they are not
covered by any warranty.
Figure 3 - Staple refill