oper3500.doc
Page 12
23/01/2004
4.
Four positions are provided for the various sized books between 4
¼
“ x 5
½
“ and 8
½
“ x 11”, with
an additional fixed centre position.
5.
BOOKLET MAKING.
1.
The machine will not operate with the top safety cover in the raised position. After closing the top
safety cover it is necessary to press the circuit reset button (if fitted), located in the left hand inside
side wall. This is an added safety feature and the machine will not cycle until the button is pressed.
Figure 8 - Operating controls
2.
When the machine is switched on the motor will not start until the first set of paper is placed in the
machine. If it is left running and not used for a period of more than three minutes the motor will
automatically switch off. The motor will re-start when paper is placed in the machine.
3.
The stapling / folding operation is started when sensors detect the paper in the machine. The time
between the paper entering the machine and the stapling action can be varied. This is achieved by
turning the Stapling Delay Control shown in figure 8 clockwise for more time and anti-clockwise
for less. When first using the machine, give the Stapling Delay Control a quarter turn clockwise.
This will give time for the operator to settle the paper between the guides before the machine
cycles.
