7
Fig – 4.2: Mounting clamp position
Step – 3:
Open the cover of the sensor and mount the sensor to the clamp with the
M5X20mm SS Round Head screws provided along with the sensor. The holes for
mounting the sensor are shown in the figure 4.3.
Fig – 4.3: Holes for fixing sensor to mounting plate.
Note: Keep the sensor cover with solar cell safely. Ensure that there is no scratch on the
solar cell and it is not soiled.
Step – 4:
Connect the interface cable according to the sensor specification. Connection
details are given in Section 5 of this manual. After connection is done, close the
cover and tighten the screws fully for retaining the IP protection.