MB MBMet-500AB, Operation And Installation Manual, Page: 2 / 13

2
1. Warnings

Installation at site should be done by skilled and qualified personal after taking required
approvals.

Use proper protection gear and tool while installing the device.

Be aware of your surroundings while doing the installation work.

Serious injury can occur if proper safety norms are not followed.

Compliance with all utility and electrical safety codes regulations are mandatory.

Read the manual and get acquainted with the senor connections and terminals before
commencing installation activity.

Before connecting the sensor system, read its label to confirm power supply
requirements.

All connections should be done only when power to the sensor is switched off.

Improper installation and connections may damage the device and sensor connected to
the same.

Protect from overvoltage and static electricity.

Physically damaged sensors should not be used or connected to main power.

Use proper earth connection.

Use proper size screwdriver (tools) and cable for connection else the terminals
might get damaged.