background image

- 4 -

2  Using Open Source Software

2.1  General Information

Our products contain, amongst others, so-called open-source software that is provided by third 

parties and has been published for free public use. The open-source software is subject to special 

open-source software licenses and the copyright of third parties. Basically, each customer can use 

the open-source soft-ware freely in compliance with the licensing terms of the respective producers. 

The rights of the customer to use the open-source software beyond the purpose of our products are 

regulated in detail by the respective concerned open-source software licenses. The customer use 

the open-source software freely, as provided in the respective effective license, beyond the pur

-

pose that the open-source software gets in our products. In case there is a contradiction between 

the licensing terms for one of our products and the respective open-source software license, the 

respective relevant open-source software license takes priority over our licensing terms, as far as 

the respective open-source software is concerned by this.

The use of the used open-source software is possible free of charge. We do not demand usage 

fees or any comparable fees for the use of the open-source software contained in our products. 

The use of the open-source software in our products by the customer is not part of the earnings we 

achieve with the contractual compensation.

All open-source software programs contained in our products can be taken from the available list. 

The most important open-source software licenses are listed in the Licenses section at the end of 

this publication.

As  far  as  programs  contained  in  our  products  are  subject  to  the  GNU  General  Public  License 

(GPL),  GNU  Lesser  General  Public  License  (LGPL),  the  Berkeley  Software  Distribution  (BSD), 

the Massachusetts Institute of Technology (MIT) or another open-source software license, which 

regulates that the source code must be made available, and if this software is not already delivered 

in source code on a data carrier with our product, we will send you this at any time upon request. 

If it is required to send this on a data carrier, the sending will be made against pay-ment of a cost 

compensation of € 35,00. Our offer to send the source code upon request ceases automatically 3 

years after delivery of our product to the customer.

Summary of Contents for mbNET MDH859





























Reviews: