MB Connect Line mbNET MDH859, Quick Start Up Manual

Page: 12 / 28

- 12 -
LED Colour Status Description
Fc1 orange
flashes (
1 Hz
) Data received at COM1
green
flashes ( 1 Hz ) Data transmission to COM1
flashes
( 5 Hz )
SIMPLY.connect * ready and disabled
This function is only available if the device is set to its factory settings.
on
SIMPLY.connect * ready and activated - activation takes place by pres -
sing the Dial Out button.
Fc2 orange flashes ( 1 Hz ) Data received at COM2
green flashes (
1 Hz
) Data transmission to COM2
Fc3 orange off GSM devices: no reception
flashes ( 1 Hz ) GSM devices: == 20% - 50%
green
off GSM devices: reception depending on Fc4
leuchtet
auf
GSM devices: (+ Fc4 green) == 71 - 100%
Fc4 orange off GSM devices: no reception
flashes (
1 Hz
) GSM device: (+Fc3 orange) == 51 % – 70 %
green
off GSM device: reception depending on Fc3
on GSM device: (+Fc3 green) == 71 – 100 %
flashes
During the activation phase of mbEDGE the LED Fc4 flashes ( 3 Hz fast).
After completion of activation Fc4 flashes at a frequency of 1.5 Hz (slow).
Function / status LEDs
*
SIMPLY.connect
is a web application that helps you to set up a device (mbNET)
in the R emote S ervice P ortal mbCONNECT24 .
To activate the function, press the
Dial Out
button until Fc1 lights up.
If you do not want to use SIMPLY.connect , simply ignore the flashing LED Fc1.
More information is available at:
https://simplyconnect.mbconnectline.com/