- 15 -
8 First time operation
Connect, depending on device type, an antenna, and insert a SIM card.
Before connecting the router to a network or PC, first ensure that it is properly connected
to a power supply, otherwise it may cause damage to other equipment.
• Connect equipotential bonding to the grounding lug on the router’s top panel.
• Connect the (10-30V DC) power supply to the
X1
terminal of the router.
Make sure that the polarity is correct.
◦ After switching on the supply voltage the Pwr LED lights up
and the device performs a system check.
◦ After about 90 sec., both LED Pwr and LED Rdy light up
and Fc1 is flashing green (5 Hz - very fast).
The
mbNET
is now ready for operation.
+ - I4 I3 I2 I1 P M O2 O1
|
X1
X2
|
galvanically isolated
Fc1
Fc3
Rd
y
Pwr
Fc2
Fc4
Con
S
tat
