Mazda MAZDA5 2006, Installation Instructions Manual, Page: 15 / 20

15
1030658 Rev.A 09/05
SERVICE PART NUMBER LIST
19
Part Number Description
0000-8F-H03 Hood Safety Switch Kit
0000-8F-Z01 Remote Start Control Module Service Part
0000-8F-L06 Mazda5 Remote Start Wire Harness Service Part
0000-8F-H05 Mazda5 Immobilizer Interface Service Part
0000-8F-F05 Mazda5 DNA Card Software Service Part
0000-8F-Z02 Mazda5 1-Button Remote Start Transmitter Service Part
0000-8F-Z10 Dipole Antenna
PowerCode®, IT-s®, Real Panic Sound® and Progressive Find® are registered trademarks of Code Systems, Inc.
The hood safety will need to be adjusted to shutdown the vehicle when the hood is raised to the full upright position
1. Raise and prop the vehicle’s hood.
2. The hood switch cylinder should be bend away from the hood to approximately 15 degrees above parallel with the
ground. (FIGURE ZZ)
3. After the adjustment has been made verify that remote start system does not engage when the vehicle’s hood is
open.
4. If the remote start system engages with the hood in the full upright position, the switch will need to be bent closer to
the hood.
18
NOTE: IT IS VERY IMPORTANT TO VERIFY THAT THE HOOD
SAFETY SWITCH PREVENTS THE REMOTE ENGINE START
SYSTEM FROM ENGAGING WHEN THE VEHICLE’S HOOD IS
IN THE FULL UPRIGHT POSITION
FIGURE ZZ
HOOD SAFETY SWITCH ADJUSTMENT