Mazda 2011 CX-9 Owner'S Manual Download Page 269

Page: 269 / 605

Black plate (268,1)

NOTE

If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.

Setting the temperature to the maximum
high or low will not provide the desired
temperature at a faster rate.

When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.

When the rear air conditioner is controlled
to the same temperature setting as the front
air conditioner for the driver's side,

“

SYNC

”

is displayed on the rear screen.

Operation from rear seats

1. Turn the front air conditioning on.

2. Press the AUTO switch. The selection

of the airflow mode and airflow
amount will be automatically
controlled.

3. Use the temperature control switch to

set the desired temperature.

NOTE

If the AUTO switch is pressed while the
front A/C switch is off, the rear air
conditioning operates only to circulate air.

Setting the temperature to the maximum
high or low will not provide the desired
temperature at a faster rate.

When selecting heat, the system will restrict
airflow until it has warmed to prevent cold
air from blowing out of the vents.

When the rear air conditioner is operated
automatically,

“

AUTO

”

is displayed on the

rear screen.

When the rear air conditioner is controlled
to the same temperature setting as the front
air conditioner for the driver's side,

“

SYNC

”

is displayed on the rear screen.

4. To turn off the system, press the OFF

switch.

6-16

Interior Comfort

Climate Control System

CX-9_8BH3-EC-10H_Edition1 Page268
Friday, July 30 2010 2:59 PM

Form No.8BH3-EC-10H

Summary of Contents for 2011 CX-9






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 CX-9

Reviews:

Related manuals for 2011 CX-9

Brands by name

Popular brands

Mazda 2011 CX-9, Owner'S Manual

Search results

Summary of Contents for 2011 CX-9

Reviews:

Related manuals for 2011 CX-9

Brands by name

Popular brands