Mazda 2011 CX-9 Owner'S Manual Download Page 246

Page: 246 / 605

Black plate (245,1)

Windshield Washer

Pull the lever toward you and hold it to
spray washer fluid.

Washer

OFF

NOTE

With the wiper lever in the OFF or intermittent
position/AUTO position, the wipers will
operate continuously until the lever is
released.

If the washer does not work, inspect the
fluid level (page 8-24). If it's normal,
consult an Authorized Mazda Dealer.

Rear Window Wiper and
Washer

The ignition must be switched ON.

Rear Window Wiper

Type A

Type B

Turn the wiper on by turning the rear
wiper/washer switch.

―

Normal

INT

―

Intermittent

Driving Your Mazda

Switches and Controls

5-73

CX-9_8BH3-EC-10H_Edition1 Page245
Friday, July 30 2010 2:59 PM

Form No.8BH3-EC-10H

Summary of Contents for 2011 CX-9






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 CX-9

Reviews:

Mazda 2011 CX-9, Owner'S Manual, Page: 246 / 605

Search results

Summary of Contents for 2011 CX-9

Reviews: