Mazda 2011 CX-9 Owner'S Manual Download Page 440

Page: 440 / 605

Black plate (439,1)

Sunvisors

When you need a sunvisor, lower it for
use in front or swing it to the side.

Sunvisor

Side Extension Sunvisors

The visor extender extends the sunvisor's
range of sun shading.
To use, pull it out.

CAUTION

When moving the sunvisor, retract
the visor extender to its original
position. Otherwise, the visor
extender could hit the rearview
mirror.

Vanity Mirrors

To use the vanity mirror, lower the
sunvisor.
The vanity mirror light will illuminate
when you open the cover.

Interior Comfort

Interior Equipment

6-187

CX-9_8BH3-EC-10H_Edition1 Page439
Friday, July 30 2010 3:1 PM

Form No.8BH3-EC-10H

Summary of Contents for 2011 CX-9






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2011 CX-9

Reviews:

Mazda 2011 CX-9, Owner'S Manual, Page: 440 / 605

Search results

Summary of Contents for 2011 CX-9

Reviews: