Mazda 2006 MazdaSpeed6 Owner'S Manual Download Page 236

Page: 236 / 354

Black plate (236,1)

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Shift into Reverse (R) or 1 and turn off

the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle

and away from the vehicle and traffic.

5. Remove the jack, tool bag, and spare

tire (page 7-3).

6. Block the wheel diagonally opposite

the flat tire. When blocking a wheel,
place a tire block both in front and
behind the tire.

NOTE

When blocking a tire, use rocks or
wood blocks of sufficient size to hold
the tire in place.

Removing a Flat Tire

1. Loosen the lug nuts by turning them

counterclockwise one turn each, but
don't remove any lug nuts until the tire
has been raised off the ground.

2. Place the jack under the jacking

position closest to the tire being
changed.

Jacking position

7-6

In Case of an Emergency

Flat Tire

Mazdaspeed6_8U01-EA-05H_Edition1 Page236
Thursday, July 7 2005 1:3 PM

Form No.8U01-EA-05H

Summary of Contents for 2006 MazdaSpeed6



































































































































































































































































































































































Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands

Mazda 2006 MazdaSpeed6, Owner'S Manual

Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands