Mazda 2006 MazdaSpeed6 Owner'S Manual Download Page 140

Page: 140 / 354

Black plate (140,1)

Ignition Switch

(With advanced key)

NOTE

When starting the engine using the
advanced key, refer to Starting the
Engine (page 3-10).

When starting the engine with the
auxiliary key, perform the following
procedure.

1. Remove the auxiliary key from the

advanced key (page 3-15).

2. Make sure the start knob is in LOCK

position.

3. Remove the start knob by pulling it

outward while pressing the buttons on
both the left and right sides.

Ignition Switch Positions

With advanced
key

Without advanced
key

LOCK

The steering wheel locks to protect
against theft. Only in this position can the
key be removed.

Push the key

5-2

Driving Your Mazda

Starting and Driving

Mazdaspeed6_8U01-EA-05H_Edition1 Page140
Thursday, July 7 2005 1:2 PM

Form No.8U01-EA-05H

Summary of Contents for 2006 MazdaSpeed6



































































































































































































































































































































































Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands

Mazda 2006 MazdaSpeed6, Owner'S Manual

Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands