Mazda 2006 MazdaSpeed6 Owner'S Manual Download Page 202

Page: 202 / 354

Black plate (202,1)

Power/Volume/Sound Controls

Power/Volume dial

Audio control dial

Power ON/OFF

Turn the ignition switch to the ACC or
ON position.

Press the power/volume dial to turn the
audio system on.
Press the power/volume dial again to turn
the audio system off.

NOTE

To prevent the battery from being
discharged, do not leave the audio
system on for a long period of time
when the engine is not running.

Volume adjustment

To adjust the volume, turn the power/
volume dial.

Turn the power/volume dial to the right to
increase volume, to the left to decrease it.

Audio sound adjustment

1. Press the audio control dial to select the

function. The selected function will be
indicated.

Depending on the mode selected, the
indication changes.

6-22

Interior Comfort

Audio System

Mazdaspeed6_8U01-EA-05H_Edition1 Page202
Thursday, July 7 2005 1:3 PM

Form No.8U01-EA-05H

Summary of Contents for 2006 MazdaSpeed6



































































































































































































































































































































































Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands

Mazda 2006 MazdaSpeed6, Owner'S Manual

Search results

Summary of Contents for 2006 MazdaSpeed6

Reviews:

Related manuals for 2006 MazdaSpeed6

Brands by name

Popular brands