Mazda 2003 Protege Owner'S Manual Download Page 64

Page: 64 / 275

3-7

Knowing Your Mazda

Doors and Locks

Form No. 8Q94-EA-02G

▼

Locking, Unlocking with Key

Either front door can be locked or
unlocked with a key.
Turn the key toward the front to unlock,
toward the back to lock.

▼

Locking, Unlocking with
Transmitter

The doors can be locked/unlocked by
operating the keyless entry system
transmitter, refer to keyless entry system
(page 3-2).

▼

Locking, Unlocking with Door-
Lock Button

To lock any door from the inside, push
down its door-lock button.
To unlock, pull it up.

To lock any door with the door-lock
button from the outside, push down its
door-lock button and close the door.

Unlock

Lock

Unlock

Lock

NOTE

When locking the doors this way, be
careful not to leave the key inside the
vehicle.

Door-lock button

J39L_EA.book Page 7 Saturday, June 8, 2002 5:35 PM

Summary of Contents for 2003 Protege




















































































































































































































































































Search results

Summary of Contents for 2003 Protege

Reviews:

Related manuals for 2003 Protege

Brands by name

Popular brands

Mazda 2003 Protege, Owner'S Manual

Search results

Summary of Contents for 2003 Protege

Reviews:

Related manuals for 2003 Protege

Brands by name

Popular brands