manualshive.com logo in svg

Mazda 2003 Protege, Owner'S Manual

The Mazda 2003 Protege Owner's Manual is an essential resource for owners of this popular compact car. This comprehensive manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and vital information to maximize their driving experience. Get your manual today and unlock the full potential of your Mazda Protege!

Share
Download
background image

5-6

Driving Your Mazda

Starting and Driving

Form No. 8Q94-EA-02G

Low brake fluid level warning

You may notice that the pedal is harder to 
push or that it may go closer to the floor. 
In either case, it will take longer to stop 
the vehicle.

1. With the engine stopped, check the 

brake fluid level immediately and add 
fluid as required (page 8-14).

2. After adding fluid, check the light 

again.

If the warning light remains on, or if the 
brakes do not operate properly, do not 
drive the vehicle. Have it towed to an 
Authorized Mazda Dealer.

Even if the light goes off, have your brake 
system inspected as soon as possible.

Electronic brake force distribution 
system warning

If the electronic brake force distribution 
control unit determines that some 
components are operating incorrectly, the 
control unit may turn the brake system 
warning light on.
In this case, the ABS warning light comes 
on at the same time (page 5-32).

Brake Warning Light:
Driving with the brake system 
warning light on is dangerous. It 
indicates that your brakes may not 
work at all or that they could 
completely fail at any time. If this 
light remains on, have the brakes 
inspected immediately. Don’t drive 
with this light on, and contact an 
Authorized Mazda Dealer to have the 
brakes inspected as soon as possible.

ABS Warning Light and Brake 
Warning Light on at the Same Time:
Driving when the brake system 
warning light and ABS warning light 
are on at the same time is dangerous.
When both lights are on, the rear 
wheels could lock more quickly in an 
emergency stop than under normal 
circumstances.
Don’t drive with both lights on, and 
contact an Authorized Mazda Dealer 
to have the brakes inspected as soon 
as possible.

WARNING

J39L_EA.book  Page 6  Saturday, June 8, 2002  5:35 PM

Summary of Contents for 2003 Protege




















































































































































































































































































Reviews:

No comments

Related manuals for 2003 Protege

Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
UAZ 2001 ???-3741 Instruction Manual preview
2001 ???-3741
Brand: UAZ Pages: 112
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
Dodge 2010 Challenger SRT Owner'S Manual preview
2010 Challenger SRT
Brand: Dodge Pages: 444
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
Reliant Rebel 700 1967 Workshop Manual preview
Rebel 700 1967
Brand: Reliant Pages: 116
Curt Group Aries 2074113 Installation Manual preview
Aries 2074113
Brand: Curt Group Pages: 2
Hamron 012463 Operating Instructions Manual preview
012463
Brand: Hamron Pages: 6
Alfa Romeo Giulia 952 2017 Owner'S Handbook Manual preview
Giulia 952 2017
Brand: Alfa Romeo Pages: 324
Rhino-Rack RLCP05 Installation Manual preview
RLCP05
Brand: Rhino-Rack Pages: 4
Whispbar K477W Fitting Instructions Manual preview
K477W
Brand: Whispbar Pages: 15

Brands by name

Popular brands

Load more brands