manualshive.com logo in svg

Mazda 2003 Protege, Owner'S Manual

The Mazda 2003 Protege Owner's Manual is an essential resource for owners of this popular compact car. This comprehensive manual can be easily downloaded for free from manualshive.com, providing users with detailed instructions and vital information to maximize their driving experience. Get your manual today and unlock the full potential of your Mazda Protege!

Share
Download
background image

8-24

Maintenance and Care

Owner Maintenance

Form No. 8Q94-EA-02G

▼

Battery Maintenance

To get the best service from a battery:

•

Keep it securely mounted.

•

Keep the top clean and dry.

•

Keep terminals and connections clean, 
tight, and coated with petroleum jelly 
or terminal grease.

•

Rinse off spilled electrolyte 
immediately with a solution of water 
and baking soda.

•

If the vehicle will not be used for an 
extended time, disconnect the battery 
cables.

For reasons of proper performance, safety, 
and better fuel economy, always maintain 
recommended tire inflation pressures and 
stay within the recommended load limits 
and weight distribution.

Tires

Using Different Tire Types:
Driving your vehicle with different 
types of tires is dangerous. It could 
cause poor handling and poor 
braking; leading to loss of control.
Except when using the temporary 
spare tire, use only the same type tires 
(radial, bias-belted, bias-type) on all 
four wheels.

Using Wrong-Sized Tires:
Using any other tire size than what is 
specified for your Mazda (page 10-8) 
is dangerous. It could seriously affect 
ride, handling, ground clearance, tire 
clearance, and speedometer 
calibration. This could cause you to 
have an accident. Use only tires that 
are the correct size specified for your 
Mazda.

WARNING

J39L_EA.book  Page 24  Saturday, June 8, 2002  5:35 PM

Summary of Contents for 2003 Protege




















































































































































































































































































Reviews:

No comments

Related manuals for 2003 Protege

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
RaceChip XLR User Manual preview
XLR
Brand: RaceChip Pages: 20
UMBRA RIMORCHI 39030 Installation Instructions Manual preview
39030
Brand: UMBRA RIMORCHI Pages: 18
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
SAF-HOLLAND FleetMaster Air FW8 Series Owner'S Manual preview
FleetMaster Air FW8 Series
Brand: SAF-HOLLAND Pages: 20
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
Hella AREIA 7040 Installation Instructions Manual preview
AREIA 7040
Brand: Hella Pages: 21
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
Goobay KFZ 112 Quick Start Manual preview
KFZ 112
Brand: Goobay Pages: 2
Discount Car Stereo A2DIY-JAG98 Quick Start Manual preview
A2DIY-JAG98
Brand: Discount Car Stereo Pages: 11
Edelbrock 3824 Installation Instructions preview
3824
Brand: Edelbrock Pages: 2
TrailPRO TPRGBW4 Quick Start Manual preview
TPRGBW4
Brand: TrailPRO Pages: 3
X-Armour XR-9500 Installation And Owner'S Manual preview
XR-9500
Brand: X-Armour Pages: 16

Brands by name

Popular brands

Load more brands