Mazda 2002 626 Owner'S Manual Download Page 60

Page: 60 / 250

3-16

Knowing Your Mazda

Doors and Locks

Form No. 8Q50-EA-01G

▼

Slide Operation

To open to any position, press the rear of
the slide switch located on the right side
of the overhead console.

To close, press the front of the slide
switch.

▼

Tilt Operation

The rear of the sunroof can be tilted open
to provide more ventilation.

To tilt, push the rear of the tilt switch
located on the left side of the overhead
console.

To close, push the front of the tilt switch.

▼

Sunshade

The sunshade can be opened and closed
by hand.

The sunshade opens automatically when
the sunroof is opened, but must be closed
by hand.

NOTE

After washing your Mazda or after a
rain, wipe the water off the sunroof
before operating it.

Open

The sunshade doesn’t tilt. To avoid
damaging the sunshade, don’t push up
on it.

Tilt up

CAUTION

J94S.book Page 16 Saturday, June 23, 2001 1:04 PM

Summary of Contents for 2002 626



























































































































































































































































Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands

Mazda 2002 626, Owner'S Manual

Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands