Mazda 2002 626 Owner'S Manual Download Page 166

Page: 166 / 250

7-6

In Case of an Emergency

Flat Tire

Form No. 8Q50-EA-01G

▼

Removing a Flat Tire

1. Pry off the wheel cover with the

beveled end of the lug wrench.

2. Loosen the lug nuts by turning them

counterclockwise one turn each, but
don’t remove any until the tire has been
raised off the ground.

3. Place the jack under the jacking

position closest to the tire being
changed.

NOTE

Force the end of the wrench firmly
between wheel and cover, or removal
will be difficult.

Align the notch on the wheel cover
with the valve stem when installing it.

Damage could occur during
installation if the wheel cover is not
properly aligned.

Lug wrench

Wheel cover

CAUTION

Tire valve

Jacking position

J94S.book Page 6 Saturday, June 23, 2001 1:04 PM

Summary of Contents for 2002 626



























































































































































































































































Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands

Mazda 2002 626, Owner'S Manual

Search results

Summary of Contents for 2002 626

Reviews:

Related manuals for 2002 626

Brands by name

Popular brands